Overview
Benefits
Easy to mix and apply without specialist tools
Cures at room temperature without hot work
Outstanding resistance to a wide range of chemicals
Excellent dielectric and insulation characteristics
Machinable using conventional tools after cure
Bonds and cures underwater, including wet and oily surfaces
Applications
Emergency and permanent repairs to active leaks in oil and water circuits.
Repair of pump keys and impellers that have suffered cavitation and corrosion damage.
Repair of worn or cavitated shafts and spindles.
Repair of deformed wedge channels; repair of worn bearing seats.
Repair of cracks in the main engine and auxiliary generator blocks, and rectification of corrosion and erosion damage to the cooling water jackets.
On-site repair of corroded flange surfaces.
Repair of cracks and holes in the fuel, ballast, waste water and fresh water tanks.
Repair of cavitation damage to propeller blades.
Elimination of metal loss caused by cavitation in the housings and tunnels of bow thrusters.
Elimination of metal loss caused by cavitation in the housings and tunnels of bow thrusters.
Specs
| TECHNICAL DATA | ||||
|---|---|---|---|---|
| Mixing ratio (Base : Solidifier) | 2:1 by volume | 4:1 by weight | ||
| Working life | 16 minutes at 20°C (68°F) | |||
| Shelf life | 3 years | |||
| Dry heat resistance | 208°C (401°F) | |||
| Adhesion (tensile shear) | Grit blasted Mild steel - clean and dry: 20.7 MPa (3,007 psi) |
Grit blasted Mild steel - oily: 18.9 MPa (2,735 psi) |
Abraded Mild steel - clean and dry: 14.7 MPa (2,130 psi) |
Abraded Mild steel - oily: 15.6 MPa (2,256 psi) |
| Volume capacity | 428 cm3 (26.1 in3)/1 kg | |||
| Heat distortion temperature | 47°C (117°F) at 20°C (68°F) | |||
| Abrasion resistance | H10 - 712 mm3 Wet | CS17 - 43 mm3 dry | ||
Mixing
| CURES TIMES | |||||
|---|---|---|---|---|---|
| Temperature | 5°C (41°F) | 10°C (50°F) | 20°C (68°F) | 30°C (86°F) | 40°C (104°F) |
| Machining and/or light loading | 6 hours | 4 hours | 2 hours | 1 hours | 30 minutes |
| Full mechanical or thermal loading | 4 days | 2 days | 1 day | 16 hours | 12 hours |
Product PDFs
Approvals
| Klas onayları: | |
|---|---|
ABS Approval |
 |
Gallery
