Belzona repair and protection products supplied with technical guidance and application support.
Product catalogue
An epoxy-based composite for metal repair.
An epoxy-based repair composite with extended working life for metal repair.
A self-lubricating epoxy metal repair composite for creation of low friction surfaces and protection of lubrication systems from wear and seizure.
An epoxy-based repair composite for application to wet and oil contaminated metal surfaces.
Surface-tolerant epoxy composite for emergency in-situ metal repair of oil contaminated, wet and underwater substrates.
A fast-curing metal repair composite for high speed emergency repairs.
A ceramic filled epoxy-based composite for metal repair and erosion and corrosion protection.
A ceramic filled epoxy coating designed to provide erosion and corrosion resistance of metal surfaces.
An epoxy coating designed to improve efficiency of pumps, pipes, valves and other fluid handling equipment while providing outstanding erosion and corrosion protection.
Hand-applied erosion and corrosion resistant coating for high temperature equipment operating under immersion.
High temperature epoxy repair composite for rebuilding equipment damaged by erosion and corrosion.
Abrasion resistant composite material for the repair and lining of metal surfaces subject to erosive attack.
High build, abrasion resistant elastomeric material designed for repair, rebuilding and resurfacing of rubber or metal components.
A flexible cavitation and abrasion resistant polyurethane elastomer for the coating of metal and rubber components.
A flexible multi-purpose polyurethane elastomer for the repair, rebuilding and coating of rubber components and metal surfaces.
A fast curing, abrasion resistant polyurethane elastomer for high speed emergency repairs, rebuilding and coating of rubber combonents and metal surfaces.
A single-component, liquid-applied flexible membrane coating for the long-term protection and waterproofing of roofs.
A two-component epoxy protective coating that provides chemical, wear and slip resistance for floors.
An epoxy coating designed for corrosion and chemical protection of equipment operating under immersion.
A high-performance epoxy coating with ceramic filler to protect critical equipment operating in immersion and erosion conditions.
A moisture-tolerant epoxy coating for corrosion protection of wet and oil contaminated surfaces.
Specially designed to endure the physical and thermal shock common to marine environments.
High mechanical strength, fatigue resistant, structural adhesive.
A mouldable, fast-curing epoxy repair stick for quickly stopping low-pressure fluid leaks prior to permanent repairs.
Composite repair system for restoring the strength of holed, weakened and corroded pipe and tank walls.
A practical Belzona repair kit, put together to meet emergency maintenance and repair needs in marine environments.
Founded in 1990, İnter-Mar Ship Repair became an authorized Belzona distributor in 2017. As the fully authorized distributor for Turkey and Northern Cyprus, we provide both Belzona product sales and professional application services in accordance with Belzona quality standards. Our team supports customers at every stage, from selecting the right system to planning and completing the application, with practical solutions for demanding marine and industrial environments.
Belzona metal repair composites are widely used for marine maintenance and repair. They provide effective solutions for rebuilding cracks, holes and worn metal surfaces, particularly where corrosion and erosion are present. Their durability and versatility also make them suitable for industrial facilities and power-generation equipment.
Belzona protective coatings are designed to extend the service life of marine machinery, equipment and structures. They protect surfaces against wear, corrosion, erosion and chemical attack, while selected systems can also improve fluid-flow efficiency.
Belzona sealing systems address leaks commonly encountered on ships, in ports and at loading facilities. Their resistance to water, oil and other fluids, together with rapid application, can reduce downtime and repair costs. Typical applications include pipelines, tanks and liquid-storage systems.
Belzona structural repair products are used to restore and reinforce damaged materials. In marine service, they are selected for components that have lost their original profile through erosion, corrosion or cavitation, including machinery parts, propulsion and steering components, exhaust-system parts, shafts and tanks.
Belzona offers a broad range of systems for marine maintenance and repair. Key products and their principal characteristics include:
Belzona 1111: A cold-curing, 100% solids epoxy composite reinforced with silicon steel alloy. It can be used for bonding, shimming, forming, rebuilding, wrapping, patching, sealing and filling. It cures without shrinkage and delivers durable in-service performance under temperature and pressure fluctuations, loading, impact and wear
Typical applications include shafts, journals, keyways, bearing housings, tanks, casings, flange faces, engine blocks and jackets, rudders, propellers, shell plating and bow thrusters.
Belzona 1121: An extended-working-life, cold-curing, 100% solids epoxy composite reinforced with silicon steel alloy, designed for warm conditions and large-area applications.
Belzona 1131: Belzona 1131, aralıklı temas ve düşük özgül yüklere maruz düşük sürtünmeli yüzeyler oluşturmak için kendinden yağlamalı, %100 katı macun türevi bir onarım sistemidir. Bu tamamen tesviye edilebilir ürün, çelik, alüminyum, bakır, fiberglas, paslanmaz çelik, cam, beton ve pirinç dahil olmak üzere hemen hemen her yüzeye, özel aletlere ve bağlara ihtiyaç duymadan uygulanabilir.
Belzona 1161: A two-part, surface-tolerant paste-grade system for fairing, repairing and rebuilding equipment, with excellent resistance to severe temperature and pressure conditions.
Belzona 1212: A fast-curing, multipurpose epoxy repair material for emergency work. Its surface-tolerant technology supports strong adhesion to steel when surface preparation is limited or the substrate is contaminated with oil or water, including underwater applications.
Belzona 1221: A two-part emergency repair composite based on a ceramic-steel-reinforced polymer system. This fully machinable material can be used to bond, repair or rebuild metallic components.
Belzona 1311: A repair composite designed to rebuild metal and protect it against erosion and corrosion.
Belzona 1321: A two-part, high-strength material for protecting equipment against erosion-corrosion. This solvent-free system is designed for continuous immersion service up to 60°C and offers strong chemical resistance and adhesion to a wide range of substrates.
Belzona 1341: A two-part coating system designed to improve the efficiency of fluid-handling equipment and protect metals from erosion-corrosion.
Belzona 1391T: A two-part, ceramic-filled epoxy coating that provides erosion and corrosion resistance for equipment operating in immersion up to 130°C. It resists a wide range of aqueous solutions, hydrocarbons and process chemicals.
Belzona 1511: A high-temperature, paste-grade system for rebuilding equipment damaged by erosion-corrosion. It can also be used as a high-strength structural adhesive or to form irregular load-bearing shims.
Belzona 1811: A two-part, ceramic- and carbide-filled repair paste and protective coating for surfaces exposed to abrasive attack.
Belzona 2111: A two-part elastomeric material designed to repair, rebuild or form rubber components.
Belzona 2141: An elastomeric protective system for equipment exposed to the extreme localized pressure caused by cavitation and erosion.
Belzona 2211: A two-part elastomeric repair composite for repairing and rebuilding rubber components.
Belzona 2311: A two-part polyurethane resin for the rapid repair, rebuilding and coating of rubber and metal components. It is suited to emergency and permanent applications requiring high build, durability, flexibility, and abrasion and tear resistance.
Belzona 5811: A solvent-free protective coating for metallic and non-metallic surfaces operating in immersion or in contact with liquid solutions.
Belzona 5831: Once cured, this two-part epoxy forms a barrier coating for equipment operating in immersion or in contact with aqueous solutions. The solvent-free coating bonds strongly to steel and non-metallic substrates such as concrete and brick.
Belzona 7111: A pourable chocking, bedding, supporting and shimming system developed to withstand the severe physical and thermal shock found in marine and industrial environments.
Belzona 7311: A fatigue-resistant adhesive optimized for structural bonding applications that require high mechanical strength and resistance to cleavage and tear under cyclic or repeated loads.
SuperWrap II: A next-generation composite repair system for restoring the strength of perforated, weakened or corroded pipe and tank walls.
Belzona 1111 is one of the most widely selected systems for marine maintenance, repair and refurbishment. This multipurpose epoxy metal repair composite rebuilds cracks, holes and worn metal surfaces, combining high adhesion with resistance to corrosion and abrasion across a broad temperature range.
Typical applications include pump casings, pipelines, tanks, valve bodies and other metal equipment. In addition to restoring damage, the system helps protect repaired surfaces against future wear and corrosion.
Visit the İnter-Mar Belzona 1111 page for further product information and technical characteristics.
As Belzona’s official distributor in Turkey, İnter-Mar combines product supply with technical support, application planning and field experience. Our team helps customers identify the correct system, prepare the application and achieve the intended service performance.
We follow developments across the Belzona range and support customers with practical recommendations for their maintenance, repair, rebuilding and protection requirements.
Contact İnter-Mar for further information about Belzona products, application methods and field services, or to request a project-specific quotation. Our experienced team can review your equipment, surface condition and operating requirements and recommend a suitable solution.
Visit our contact page for telephone numbers, email details and the enquiry form.
